Sena 10Upad - Page 36

10Upad
36
3. The non-Sena Bluetooth headset (D) may join the conference
intercom by making an intercom call to the 10Upad (C).
(B)
(D)
(A)
(C)
4. Now two 10Upad headsets (A & C) and two non-Sena Bluetooth
headsets (B & D) are connected with the four-way Universal
Intercom.
(B)
(D)
(A)
(C)
You may disconnect a four-way Universal Intercom using the same
way as you do in a normal four-way intercom. Please refer to
section
8.3.2, “Ending Four-way Intercom”.
11.4.2 Four-way Universal Intercom Case 2
Three 10Upad headsets (A, C and D) and one non-Sena Bluetooth
headset (B). The procedure is the same as case 1 described in section
11.4.1 .
(B)
(D)
(A)
(C)