Sena R1 Getting Started

R1 Smart Cycling Helmet | 26
2 GETTING STARTED: BUILT-IN BLUETOOTH SYSTEM
MENU
2.7 Configuration Menu
TheBluetoothsystemcanbeconguredbyfollowingaseriesofvoice
prompts.Furtherdetailsabouteachofthesesettingswillbeexplained
onthefollowingpages.
1.ToaccesstheBluetooth System Configuration Menu,pressand
holdtheCenter Buttonfor10 secondsuntilyouhearthevoice
prompt,“Configuration menu”.
Accessing the Bluetooth System Configuration Menu
=
10s
HOLD
ACCESS
CONFIG.
MENU
“Configuration menu”
2.Tapthe(+) Buttonorthe(-) Buttontonavigatebetweenthemenus.
Youwillhearvoicepromptsforeachmenuitem.Thelistoffunctions
isshownintheBluetooth System Configuration Menuonpage
27.
Navigating Forward through the Menu
=
1x
TAP
NAVIGATE
FORWARD
“[Menu prompt]”

Sena R1 Specifications

General

Integrated Intercom	Yes
Microphone	Built-in
Charging Time	3 hours
Operating Temperature	-10°C - 55°C (14°F - 131°F)
Compatibility	Works with most Bluetooth-enabled devices