Sena R1 Getting Started

R1 Smart Cycling Helmet | 55
7 USING THE FM RADIO
MENU
4. Press and hold the (+) Button for 1 second to save the station in the
preset number you choose. Or, press and hold the (-) Button for 1
second to delete the station from memory.
Save Station to the Preset Number
=
1s
HOLD
SAVE TO
PRESET #
Delete Station from Memory
=
1s
HOLD
DELETE
STATION
7.3 Scan and Save Radio Stations
The “Scan” function automatically searches for radio stations, starting
with the current station’s frequency, then up from there.
1. Press and hold the (+) Button for 1 second to scan for stations.
Scan and Save Radio Stations
=
1s
HOLD
START
SCANNING
2. The Sena tuner pauses at each station it finds for 8 seconds before
moving to the next.
3. To save the current station, tap the Center Button. The station will be
saved as the next preset number.

Sena R1 Specifications

General

Integrated Intercom	Yes
Microphone	Built-in
Charging Time	3 hours
Operating Temperature	-10°C - 55°C (14°F - 131°F)
Compatibility	Works with most Bluetooth-enabled devices