Sena SRL-EXT - External Mesh Intercom Antenna

SRL-EXT Motorcycle Mesh & Bluetooth
®
Communication System for Shoei Helmets | 17
2 INSTALLING THE HEADSET ON YOUR HELMET
15. After aligning the cables, attach the speaker (R) connector and the
cables with adhesive tape on the last cavity located at the rear of the
helmet.
Last Cavity
Note: Do not cover the snap fastener with the aligned cables. Make
sure the aligned cables are placed above the snap fastener.
16. Reattach the center pad, cheek pads, and ear pads starting from the
rear and click the snap fasteners.
Cheek Pad (R) Cheek Pad (L)
Center Pad
Ear Pad (R) Ear Pad (L)
2.2 External Mesh Intercom Antenna
Pull the Mesh Intercom Antenna inwards
slightly to unfold it.
2
1