Sena SRL-EXT - Starting Mesh Intercom; Using the Mesh in Open Mesh

SRL-EXT Motorcycle Mesh & Bluetooth
®
Communication System for Shoei Helmets | 32
7 MESH INTERCOM
7. 2 Starting Mesh Intercom
When Mesh Intercom is enabled, the SRL-EXT will automatically
connect to nearby SRL-EXT users and allow them to talk to each other
by pressing the Mesh Intercom Button.
Mesh Intercom On
=
1x
TAP
Blinking
“ Mesh intercom on,
Open Mesh,
channel 1”
Mesh Intercom Off
=
1x
TAP
“ Mesh intercom off”
7.3 Using the Mesh in Open Mesh
When Mesh Intercom is enabled, the headset will be in Open Mesh
(default: channel 1) initially.
7.3.1 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because
other groups are also using channel 1 (default), change the channel.
You can select from channels 1 to 9.
1. Double tap the Mesh Intercom Button.
=
2x
TAP
“ Channel setting, 1”
2. Navigate between channels.
(1
2 ••• 8 9 Exit 1 •••)
=
1x
TAP
or
=
1x
TAP
“#”