Sena SRL-EXT User Manual

SRL-EXT Motorcycle Mesh & Bluetooth
®
Communication System for Shoei Helmets | 23
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.1.3 Pairing When the SRL-EXT is Turned On
1. While the headset is on, press and hold the Center Button for
10 seconds.
=
10s
HOLD
“ Configuration
menu”
2. Tap the (+) Button.
=
1x
TAP
Blinking
“ Phone pairing”
3. Select SRL-EXT in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
Device B
Pi
Bluetooth
SRL
-
EXT
4.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. Press and hold the Center Button for 10 seconds.
=
10s
HOLD
“ Configuration
menu”
2. Double tap the (+) Button.
=
2x
TAP
Blinking
“ Second mobile
phone pairing”
3. Select SRL-EXT in the list of
Bluetooth devices detected. If your
Bluetooth device asks for a PIN,
enter 0000.
Device B
Pi
Bluetooth
SRL
-
EXT

Sena SRL-EXT Specifications

General

Audio Advanced Noise Control	Yes
Audio Built-in SBC Codec	Yes
Audio Wide Volume Control	Yes
Battery Charging Time	2.5 hours
Certificates	CE, FCC, IC
Music Sharing	Yes
FM Radio	Yes
Voice Command	Yes
Operating Temperature	-10°C to 55°C
Profiles	HFP, HSP, A2DP, AVRCP