SRL-EXT Motorcycle Mesh & Bluetooth
®
Communication System for Shoei Helmets
| 34
7 MESH INTERCOM
Note:
• If the Mesh Grouping is not completed within 30 seconds, users
will hear a voice prompt, “Grouping failed”.
• If you want to cancel during the Mesh Grouping, tap the Mesh
Intercom Button.
7.4. 2 Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new
users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing
Group Mesh Open Mesh Existing Group Mesh
D
F
B
C
You
D
F
B
C
You
1. To enter Mesh Grouping to join the Existing Group Mesh, press and
hold the Mesh Intercom Button for 5 seconds on the headsets of
one (You) of the current users in the Existing Group Mesh and the
new users (D and F) in Open Mesh.
=
5s
HOLD
“ Mesh grouping”
2. When Mesh Grouping is completed, the new users (D and F) will
hear a voice prompt on their headsets as Open Mesh switches to
Group Mesh.
FD
“ Group Mesh”
Note: If the Mesh Grouping is not completed within 30 seconds, the
current user (You) will hear a low tone double beep and the new users
(D and F) will hear a voice prompt, “Grouping failed”.
To Next Page
Loading...
Need help?
General
