A. PREFACE
The SI9500 is a professional instrument that if used correctly will give
accurate results and service. It is essential that users familiarise themselves
with its operation and that before being put into use the instrument is set up
correctly.
The person responsible for the instrument should read this manual,
particularly Chapter 2 and then either Chapter 3 or Chapter 4 depending
upon the chosen operating mode. When this has been done the following
quick guide may be used as a reminder of the sequence of operations.
ON THE FRONT COVER:
Top picture
SI9500 Film Weight Gauge.
Bottom picture
Left view - SI9505 Flat sheet probe.
Top middle view - SI9507 Formed can probe.
Right view - SI9550 Hover Probe.
To Next Page
Loading...
Need help?
General
