VP400 Series Video Pro Form7343A Operation Manual
53
3. Select Signal Format
The “FORMAT” selections within the menu’s of the VP403C provide varying signal resolution
output formats to meet today’s video display testing needs. Displays accept NTSC on RF
channels, composite video or S-video inputs. HD-ready displays accept an RF channel,
component (YPrPb) and/or an RGB input with resolution formats for HDTV including 480i,
480p, 720p and 1080i.
Upon selection of an ATSC-RF channel (Step 2), the format menu automatically appears on the
VP403C. This is the same menu that appears when the “FORMAT” pushbutton is pressed. Note:
The first or upper- most display menu of the HDTV/SDTV formats lists the most popular
resolutions used, and are compatible with most HD ready displays.
The moving video clips are available in the 720P59 or 1080i29 format. Push the button located
beside the display screen for one of these formats. The 720P59 format provides the Hot Air
balloon clip and the 1080i29 format provides the Hawaii nature scene clip.
1080i29 = Hawaii Nature Scenes
720P59 = Colorful Hot Air Balloons
Figure 3. Select the
resolution format either
720P59 or 1080i29 by
pressing the pushbutton
beside the display
screen.
4. Select Video 1 Test Clip
To select the video test clip for operation at 720p or 1080i you must push the “Pattern”
pushbutton on the VP403C. Push the “-“ scroll down button on the VP403C to increment to the
last of the 4 pattern menu screens. Press the pushbutton beside the display indicating “Video 1”
selection.
Note: If you do not see a “Video 1” selection in the Pattern menu you need to return to the
Signal Type menu to be sure you have selected the ATSC –RF type and the FORMAT menu to be
sure you selected 720p59 or 1080i29. If its still not there you have a VP403C model which does
not include video clips.
To Next Page
Loading...
Need help?
General
