Chapter 2: Installation 17
accuMAG Meter Quick Guide Software v4.1.2 WQG-10004-01
2.9 Mounting of the IP68 version
Figure 2-20: Closing of IP68 housing
1. Before closing the case of the converter, ensure that all surfaces in contact with the seals are clean.
2. Position the upper part of the case and tighten the lock ring.
3. Use the wrench to tighten the ring as shown.
| sales@mvandc.com | Phone: 877.566.3837 | Fax: 925.407.2903
To Next Page
Loading...
