accuMAG Meter Quick Guide Software v4.1.2 WQG-10004-01
1 Safety Instructions
1.1 Instructions for transportation and handling of batteries
The used lithium batteries are primary power sources with high energy content. If mistreated, they
may present a potential risk.
Please observe the following instructions:
• Transport only in special packaging with special labels and transportation documents.
• Do not short-circuit, recharge, overcharge
or connect with false polarity.
• Do not expose to temperature beyond the specified temperature range or incinerate the battery.
• Do not crush, puncture or open cells or disassemble battery packs.
• Do not weld or solder to the body of the battery.
• Do not expose contents of battery to water.
• Remove the battery from device before returning to the man
ufacturer for service or warranty
reasons.
• Dispose of battery packs in accordance with loca
l regulations; where possible, recycle used
batteries.
Note: The manufacturer assumes no liability for customer failure.
| sales@mvandc.com | Phone: 877.566.3837 | Fax: 925.407.2903
To Next Page
Loading...
