NOTE!
– The total ll quantity of the cup for beverages
prepared with milk consists of the coffee quan-
tity plus the milk/milk froth quantity! Take this
into account when selecting your cup.
– The pause time inuences the layering for a
latte macchiato.
7.2.1 Storing personal settings
Here’s how to programme your own settings for coffee preparation:
1. Press the menu button and use the arrow keys to select the menu
option
Bev. sett. menu.
 The display shows a list with the coffee specialities.
2. Select the coffee speciality whose settings you would like to change.
 The display shows the setting possibilities for the selected coffee
speciality (see previous table: "Preparation variants").
3. Select the setting that you would like to change.
 The display shows a bar with the currently selected setting.
4. Use the arrow keys to change the setting and
• conrm the change by pressing OK, or
• cancel the change with the button under the display eld
.
5. Then press the menu button to exit the menu.
 The display shows the "Beverage selection" view. The settings
are now saved. You can apply the settings by simply selecting the
symbol with the respective button (►"6.3 Preparing coffee
specialities").
7.2.2 Making personal settings quickly
(Quick Select)
You can also make the settings temporarily before the preparation:
1. In the "Beverage selection" view, press the button
•
to change the currently set coffee strength.
•
to change the currently set water quantity.
•
to change the currently set milk/milk foam quantity.
2. Select the desired setting using the arrow keys.
3. Press OK.
 The selected coffee speciality is prepared using the selected
settings. However, these settings are not saved.
7.3 Changing the device settings
7.3.1 Language
This is how to select the preferred language for the display.
1. Press the menu button and use the arrow keys to select the menu
option
device menu.
2. Then select the
language
menu option.
 The display shows the available languages.
3. Use the arrow keys to change the setting and
• conrm by pressing OK, or
• cancel the change with the button under the display eld
.