The display shows:
rinsing
The rinsing is complete as soon as "Beverage selection" appears
again.
8.2.2 Rinsing the milk system
For hygienic reasons, as well as to ensure consistently high quality when
preparing milk coffee specialities, the milk system must be rinsed after each
cycle of use.
1. Press the menu button and use the arrow keys to select the menu
option
cleaning
2. Then select the
milk unit
menu option
 The display shows:
Please Place milk tuBe in water jar
3. Plug the milk tube onto the connection on the coffee-milk dispenser and
place the other end of the tube in a container lled with 200 ml clean,
cold water.
4. Press OK to conrm.
 The display shows:
Please Position container
5. Place a cup with a capacity of at least 200 ml on the cup tray below the
coffee-milk dispenser of the device and adjust the height of the coffee-
milk dispenser to the cup height.*
6. Press OK to conrm.
* depending on the model
g. 9: Removing the coffee-milk dispenser g. 10: Removing the milk frother nozzle g. 11: Drip tray assembly
g. 10a
To Next Page
Loading...
Need help?
General
