The display shows:
milk unit
The rinsing of the milk system is complete as soon as "Beverage
selection" appears again.
8.2.3 Cleaning the milk system
The device has a milk cleaning programme that can remove any milk
residues with the SEVERIN milk system cleaner.
NOTE!
The cleaning process takes approx. 3 minutes.
1. Press the menu button and use the arrow keys to select the menu
option
cleaning
2. Select the
clean milk sYs.
menu option
 The display shows:
Please Place milk tuBe in cleaning liquid
3. Fill a container with 200 ml warm water and 20 ml SEVERIN milk
system cleanser. (mixing ratio 1:10)
4. Plug the milk tube onto the connection on the coffee-milk dispenser
and place the other end of the tube in the container lled with cleaning
solution.
5. Press OK to conrm.
 The display shows:
Please Position container
6. Place a cup with a capacity of at least 200 ml on the cup tray below the
coffee-milk dispenser of the device and adjust the height of the coffee-
milk dispenser to the cup height.*
7. Press OK to conrm.
 The display shows:
CLEAN MILK SYS.
The cleaning of the milk system begins.
8. As soon as the command
Please Place milk tuBe in water jar
appears on the display, place the end of the milk tube in a container
lled with 200 ml clean, cold water.
9. Press OK to conrm.
 The display shows:
Please Position container
10. Empty the cup underneath and place it underneath the coffee-milk
dispenser of the device on the cup tray once again.
11. Press OK to conrm.
 The display shows:
rinsing
The rinsing of the milk system is complete once "Beverage
selection" appears again.
8.2.4 Cleaning programme
The device has a cleaning programme with which the coffee system can be
rinsed and cleaned intensively with a cleaning tablet.
NOTE!
If you carry out the cleaning program immediately
after the display of a cleaning message, steps 1
and 2 can be omitted.
1. Press the menu button and use the arrow keys to select the
cleaning
menu option.
* depending on the model
To Next Page
Loading...
Need help?
General
