9. Troubleshooting
In addition to the cleaning messages, the display also shows an appropriate
message in case of a technical fault.
WARNING!
When opening a defective unit, there is a danger
of injury.
– Never repair a defective device yourself. In
case of a technical defect, contact SEVERIN
customer service.
Display Cause Remedy
Please
clean Brew-
ing unit.
The brewing unit
must be cleaned.
Clean the brewing unit (►"8.3
Cleaning the brewing unit").
check Brew-
ing unit and
insert.
The brewing unit is
not inserted correctly.
Insert the brewing unit (►"8.3
Cleaning the brewing unit").
sYstem
error.
A system error has
occurred.
Switch the unit off for several
seconds, then turn it on again.
Disconnect the unit from the
mains for several seconds.
If the problem persists, contact
our customer service.
Please re-
fill coffee
Beans.
The bean container is
empty.
Fill the bean container with
beans
(►"6.3 Preparing coffee
specialities").
Display Cause Remedy
The grind mechanism
is blocked.
Set the grinder regulator on
the coarsest neness (►”7.1
Setting the grinding neness”)
and prepare another coffee
speciality.
If this solves the problem, set
the desired neness again for
the next beverage.
If problem persists, contact
customer service.
Brewing unit
door oPen.
The door of the brew-
ing unit is not closed.
Properly close the door of the
brewing unit.
rinsing
necessarY.
Please
Press
ok-Button.
After the cover of
the brewing unit has
been opened, rinsing
becomes necessary.
Press OK; rinsing will start
automatically.
To Next Page
Loading...
Need help?
General
