NOTE!
– The descaling process can take as long as
45 minutes.
– No warranty is made for damage that is due to
devices which have not been descaled regularly.
– If you descale immediately after the display
of a cleaning message, steps 1 and 2 can be
omitted.
– If you use a water lter, remove it before
descaling.
1. Press the menu button and use the arrow keys to select the menu
option
cleaning
2. Then select the
descaling
menu option
 The display shows:
emPtY driP traY and grounds cont.
3. Remove the drip tray and empty it together with the grounds container.
4. Re-assemble all parts and push the drip tray back into the appliance.
5. Press OK to continue.
 The display shows:
Please add descaling solution
6. Fill the water tank halfway with lukewarm tap water and place the desca-
ling tablets in the water tank.
7. Wait until the descaling tablets are completely dissolved, and then place
the water tank on the appliance.
8. Press OK to continue.
 The display shows:
descaling
9. As soon as the command
emPtY driP traY and grounds cont.
appears on the display, empty the drip tray and grounds container
again. Clean the parts with clear tap water and reinsert them into the
appliance.
10. Press OK to continue.
 The display shows:
rinse container and fill with water
11. Rinse the water tank thoroughly with clear tap water, then ll it to the top
and put it back on the appliance.
12. Press OK to continue.
 The display shows:
descaling
Descaling is complete as soon as "Beverage selection" appears
again.
8.2.6 Changing the water lter
For constant water quality, the water lter must be changed regularly.
NOTE!
If you change the water lter immediately after the
display of a cleaning message, steps 1 and 2 can
be omitted.
1. Press the menu button and use the arrow keys to select the menu
option
cleaning
2. Then select the
water filter
menu option
To Next Page
Loading...
Need help?
General
