2. Fill the bean container with coffee beans (g. 4). Always ensure there
are enough beans in the container.
NOTE!
Do not use caramelised coffee beans!
3. Close the cover of the bean container.
6.3.1 Preparing coffee or espresso
To prepare a coffee or espresso, there must be enough beans in the bean
container and enough water in the water tank.
1. Place a cup on the cup tray below the coffee-milk dispenser and adjust
the height of the coffee-milk dispenser to the cup height (g. 5).
2. Use the arrow keys to select
coffee or esPresso.
3. If desired, you can use the button under the display eld
•
to change the set coffee strength
•
to change the set water quantity.
NOTE!
To prepare the coffee speciality with your own
settings, press the respective button until is
displayed after the corresponding symbol (►"7.2
Making individual settings for coffee preparation").
4. Conrm by pressing the OK button.
 The desired coffee speciality is being prepared.
5. To change the coffee quantity during dispensing, use the arrow keys
while the process is going on.
 The display shows a bar with the set quantity in "ml".
The coffee dispensing stops automatically after the selected
quantity has been prepared. It can also be stopped early by
pressing the OK button.
6.3.2 Preparing coffee-milk specialities
To prepare a cappuccino, a white coffee, hot milk or a latte macchiato, there
must be enough beans in the bean container and enough water in the water
tank. Also place a container lled with milk (e.g. SEVERIN thermo milk-jug)
next to the appliance.
NOTE!
Coffee specialities with milk are best prepared
using chilled milk with a high protein content.
1. Plug the milk tube onto the connection on the coffee-milk dispenser and
place the other end of the tube in the milk container (g. 6), or connect
the lled thermo milk-jug to the automatic coffee maker.
NOTE!
Make sure that the tube is submerged in the milk so
that the milk can be drawn correctly by the device.
2. Place a cup on the cup tray below the coffee-milk dispenser of
the appliance and adjust the height of the coffee-milk dispenser to
the cup height (g. 5).
3. Use the arrow keys to select
caPPuccino, latte macchiato,
white coffee or milk.
4. If desired, you can use the button under the display eld
•
to change the pre-set coffee strength
•
to change the pre-set water quantity
•
to change the pre-set milk/milk froth quantity.
To Next Page
Loading...
Need help?
General
