CAUTION!
Incorrect handling of the brewing unit can cause
damage to the brewing unit.
– Do not take the brewing unit apart or adjust it.
– Push the brewing unit in place from below.
6. Insert the brewing unit into the machine and push it in until, the locking
latches are aligned. (g. 16).
7. Press the red lever of the brewing unit down. If the lever does not move,
check the position.
8. Close the brewing unit again with the cover.
8.4 Cleaning the bean container
The bean container must be cleaned regularly to prevent contamination.
Ideally this is done when the supply of beans is used up and before new
beans are added.
CAUTION!
There is a danger of damage to the device if
objects fall into the bean feed.
– Switch the device off before starting cleaning.
– Do not let any objects fall into the bean feed.
Here's how to clean the bean container:
1. Switch the appliance off and disconnect the plug.
2. Wipe the bean container with a dry, lint-free cloth.
1.
2.
1.
2.
1.
2.
g. 14: Removing the cover of the brewing unit g. 15: Pulling out the brewing unit g. 16: Inserting the brewing unit
To Next Page
Loading...
Need help?
General
