SEW-Eurodrive ECDriveS ECC-DFC - Page 17

Introduction
Manual – ECC-DFC field bus controller
17
[13]
Button for module exchange
[14]
Left connection – RJ45 Ethernet network connection between modules
[15]
Right connection – RJ45 Ethernet network connection between modules
[16]
Removable IP54 cover for Ethernet connections
[17]
1 x power wiring cable gland for degree of protection IP54,
2 x RJ45 protective casing for degree of protection IP54
INFORMATION
The designations “left” and “right” for the module connections are based on the
shown view of the module and must not be confused with the product flow direc-
tion on the conveyor belt. The direction of the product flow is designated using
“upstream” or “downstream”.