Hardware connections
Manual ā ECC-DFC field bus controller
4.3. Left and right Ethernet connections
Both connections are RJ45 sockets that correspond to the pin assignment of the
Ethernet connection. In order to comply with degree of protection IP54, Ethernet
cables must be equipped with protective sleeves.
Figure 6 shows the used Ethernet cables with sleeves to protect the RJ45 con-
nector at the Ethernet cables. The scope of delivery of each module includes 2
sleeves.
Figure 6 ECC-DFC with right and left Ethernet cables
Figure 7 IP54 sleeve for the ends of RJ45 Ethernet cables
Figure 8 IP54 sleeve attached to end of an Ethernet cable
To Next Page
Loading...
