Sfere DGN175 U - DIRECT FUNCTIONS P22; Display of the Direct Input Measure P22; Quick Programming of the Alarm Setpoints P22

CLr.N
CLEAr
Display 1 sec.
Back to the measure.
DIr.N
DIr.N
04.00
Display of the input
measure.
Back to the measure
Press
FUnCt.
5.1 reset to 0 Min. / Max. values
Access by the menu FUnCt or by pressing during the measure display.
p22
5 . DIRECT FUNCTIONS
5.2 Display of the input direct measure
Access by the menu FUnCt or by pressing simultaneously +
during the measure display.
5.3 0 reset of the alarm recordings
Access by the menu FUnCt or by pressing simultaneously + during
the measure display.
* If option Relays
If access locked by code.
*
CLEAr
Display during 1 sec.
Deleting of the recorded alarms.
CLr.AL
5.4 Quick programming of the alarm setpoints
Access by the menu FUnCt or by pressing simultaneously + during
the measure display.
*
Back to the measure.
If access locked by code.
C0dE
0000
G00D
Prg.AL
C0dE
reL1
0000
G00D
sPt.1
0000
reL2
0000
Programming of the setpoint of the relay.
1.
Entering of the new
setpoint value.