20
3
Making copies
NORMAL COPYING
7
Set the number of copies using the two copy quantity ( , ) keys.
●
Press the clear ( ) key to clear an entry if a mistake is made.
●
A single copy can be made with the initial setting, i.e., when “0” is displayed.
●
If copying onto special papers, feed one sheet at a time and leave the copy
quantity at 0.
●
Press the right copy quantity key to set the units
digit from 0 to 9. This key will not change the
tens digit.
●
Press the left copy quantity key to set the tens
digit from 1 to 5. Up to 50 copies can be set.
8
Press the print ( ) key.
●
To display the number of copies made in a continuous run, press the left
copy quantity key.
●
To stop copying in the middle of a run, press the clear ( ) key. Copying will
stop and the number in the display will be reset to “0”.
●
When the print ( ) key is pressed while printing is being performed, printing
will be interrupted and copying will start. Printing will be resumed after copying
is finished. (AL-840 only)
Do not perform copying with the original cover open.
ON LINE
ZOOM
ON LINE
Tens digit
Units digit
To Next Page
Loading...
