8
Preparation
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• To attach the stand, perform the above steps in reverse order.
2
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of
the base area.)
1
Unfasten the four screws used to secure the
stand in place.
Setting the TV on the wall
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
• You can ask a qualified service personnel about using an optional AN-37AG2 bracket to mount the TV to the
wall.
LC-32GA4E(E)-b 04.5.30, 9:06 AM8
To Next Page
Loading...
