Sharp AQUOS LC-32GA4E - WIDE Mode (for PC Input Mode)

43
Useful adjustment settings
WIDE MODE
Normal
Cinema
Full
Dot by Dot
Input signal
(640m480)
Input signal
(1024m768)
WIDE mode (for PC input mode)
You can select the screen size.
a
Press f.
• The WIDE MODE menu displays.
1
2
Press f or a/b to select a desired item on
the menu.
WIDE MODE
Cinema
Full
Dot by Dot
Input Signal
Normal Dot by DotFullCinema
Input Signal
Normal Dot by DotFullCinema
640g480 Keeps the original
aspect ratio in a full
screen display.
Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image are
slightly cropped.
Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
An image fully fills
the screen.
1024g768
NOTE
• Connect the PC before making adjustments. (See page
36.)
• Selectable screen size may vary with input signal type.
a
Screen size images.
Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image are
slightly cropped.
Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
An image fully fills
the screen.
LC-32GA4E(E)-i 04.5.30, 9:25 AM43