Preparation
Using Digital Audio Output
It
is
possible
to
output audio through the DIGITAL AUDIO OUTPUT terminal. (See page
31
for details.) PCM audio
outputs from the terminal.
DIGITAL
AUDIO
OUTPUT
To optical digital input of
external audio devices
DIGITAL
AUDIO
INPUT
~D
Optical fiber cable
(commercially available)
ImIi)
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal
in
HDMI
connection.
In
this case, set the audio formats
of
the connected equipment to PCM,
32/44.1/48
kHz and
16
bits.
Connecting
HDMI
Equipment
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI-certified cable
iiili
m,
(commercially available)
ID~~------~
HOMI equipment
ImIi)
• When using an HDMI-DVI conversion cable, input the audio signal
to
the AUDIO terminal
of
INPUT 6.
• To enjoy the
AQUaS
1080p
display capability, connect your Blu-ray disc player, HD-DVD player
or
other external equipment
using an HDMI-certified cable and set the equipment
to
1080p output.
Connecting a PC
When connecting to a PC with an analog RGB terminal (INPUT
7):
03.5
mm stereo minijack cable
(commercially available)
PC
RGB cable
~
(commercially available)
!~------
~III
When connecting to a PC with an HOMI terminal (INPUT 4, 5 or
6):
HDMI-certified cable
Homl
(commercially available)
m~I-------~
PC
• The HDMI terminals only support digital signal.
• Refer to page 50 for a list
of
PC
signals compatible with the
TV.
@-14
To Next Page
Loading...
