On-Screen Display Menu
Picture Menu
Adjusts the picture to your preference with the
following picture settings.
Example
'II Picture
mm
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to
"On:
Display", OPC effect displays
on
the
screen while the OPC adjusts the screen brightness.
• When set to "On" or
"On:
Display", the OPC indicator
on
the
1V
lights green.
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
Color tone
is
managed using the six-color adjustment
setting.
C.M.S.-Hue: This
is
a standard to adjust the color either
more reddish or more bluish
in
tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
mm
• For resetting
all
adjustment items to the factory preset
values, press
J;./T to select "Reset", and then press
ENTER.
ope·
Setting
Backlight The screen dims The screen
briqhtens
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High: t
Middle:
Mid-Low:
Low:
White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of
-30
for each color temperature.
R Gain:
-30
through +30
G Gain:
-30
through +30
B Gain:
-30
through +30
mm
• For resetting
all
adjustment items to the factory preset
values, press
J;./T to select "Reset", and then press
ENTER.
~TActiV;f~on6stf~~,J'
,.
.
.~
,-
_~,'Ol".
=
.......
__
Automatically adjusts the image contrast according to
the scene.
On:
Automatically adjusts the image contrast.
Off:
No adjustment.
Skin tones Skin tones
become reddish become qreenish
For less contrast For more contrast
. For less For more
sharpness sharpness
Sharpness
Brightness
Tint
Contrast
For less For more
briqhtness briqhtness
~._------+-=-"='-:::"=-=-=----+-=-~:::"=-=-=------1
Color For less color For more color
intensity intensity
• For resetting
all
Picture adjustment items to the factory
preset values, press
J;./T to select "Reset", press ENTER,
press
....
/~
to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
Off:
The
brightness
is
fixed
at
the value set
in
"Backlight".
On:
Automatically adjusts.
On:
Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
1 Press
MENU
to display the MENU screen, and then
press
....
/~
to select "Picture".
2 Press
JJJ'"
to select a specific adjustment item.
• Select "Advanced" and then press ENTER to set
"C.M.S. -Hue", "C.M.S.-Saturation", "Color Temp.",
"Active Contrast",
"Fine
Motion Advanced", "liP
Setting",
"Film
Mode", "Digital Noise Reduction", "3D-YI
C", "Monochrome" or "Range of OPC".
3 Press
Ji..I''''
(or
....
/~)
to select the desired setting,
and then press ENTER.
4 Press
MENU
to exit.
i;tlj$8I~~·itiriJ~T:
i1llf?i;;Ci~""~Q"'~~tI~!;;
k';~~~5:.b:··
@-
22
To Next Page
Loading...
