IMPORTANT INFORMATION
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE
CART,
STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A
CART,
STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING:
FCC Regulations state that any unauthorized changes
or
modifications
to
this
equipment
not
expressly
approved by the manufacturer could void the user's authority
to
operate this equipment.
CAUTION:
This
product
satisfies FCC regulations when shielded cables and
connectors
are used
to
connect
the
unit
to
other
equipment.
To
prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and
connectors
for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-46SE94U/LC-52SE94U/LC-65SE94U
This device complies with Part 15 of the FCC Rules. Operation is subject
to
the following
two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE
PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah,
New
Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL
http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur
in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be
determined by turning the equipment off and on, the user
is
encouraged to try to correct the interference by one or more of the
. following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into
an
outlet
on
a circuit different from that to which the receiver
is
connected.
- Consult the dealer or
an
experienced
radioflV
technician for help.
"Note to
CATV
system
installer:
This
reminder
is
provided
to
call
the
CATV
system
installer's attention to Article
820-40
of
the
National
Electrical
Code
that
provides
guidelines
for
proper grounding
and,
in
particular,
specifies that
the
cable
ground
shall
be
connected to
the
grounding
system
of
the
building,
as
close
to
the
point
of
cable
entry
as
practical."
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount
of
mercury. Disposal
of
these materials may be regulated due
to
environmental
considerations. For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling
organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP
(For U.S.A. only)
Trademarks
• Manufactured
under
license from
Dolby
Laboratories.
"Dolby"
and
the
double-D
symbol
are
trademarks
of
Dolby
Laboratories.
•
"HDMI,
the
HDMI
logo
and High-Definition
Multimedia
Interface are
trademarks
or
registered
trademarks
of
HDMI
Licensing LLC."
•
Products
that
have earned
the
ENERGY
STAR®
are
designed
to
protect
the
environment
through
superior energy
efficiency.
@-2
To Next Page
Loading...
