Using the Internet
• By connecting your
lV
to a broadband system, you can access the Internet from the
lV.
• Display the "Sidebar Widget" on the
lV
screen to check out the latest Internet information and access a range
of
useful information for
AQUaS
users from the original home page*.
* About the original home page
• The original home page
is
a website set up specifically for
AQUaS
owners.
• The website
is
worth visiting as it provides a range of useful information, including tips on using your
AQUaS
and a frequently asked questions section.
Internet Setup
• Connecting
to
the Internet
• To connect your
lV
to the Internet, you must
have
a broadband Internet connection.
• Use
an
ETHERNET cable (commercially available)
to
connect the ETHERNET terminal on the
lV
to your
broadband router (commercially available).
• If you do not
have
a broadband Internet connection, consult the store where you purchased your
lV
or ask your
Internet service provider
or
telephone company.
Internet
ETHERNET cable
(commercially available)
'OTFOACK
I
VOL
CH
SUAROUND(J
tJMUTE
o - v 0
FREEZE
MENU
o~o
8e8
• Checking your Internet connection
• Press
NET
twice or three times to switch to the
lV+Web
or Web screen. When
the original home page appears,
now
you are connected to the Internet.
• If you
have
failed to connect to the Internet
in
the above operation, then an
error message will appear.
In
this case, press EXIT
to
return to the
normallY
screen and check the relevant settings (see page 39).
•
If
you still cannot connect to the Internet, please consult your Internet service
provider
or
telephone company.
EXIT
e------')
RETURN
.~o
• Information on
the
PLC adapter
Up to four devices can be connected
to
the HN-VA400U
adapter.
HN-VA401SU
HN-VA400U
HN-VA100U
(available March 2008)
(@-
38
4
+1
4
The SHARP PLC adapter kit (sold separately) lets you
use the existing electrical wiring
in
your house to create
a home network.
*1
Simply plug the adapters into electrical outlets at the
desired locations, and then connect your computer
and other devices to the adapteres with LAN cables
(two LAN cables are provided).
If
you
have
Broadband Internet service, connect your
router to one of the adapters to allow
all
your network
devices
to
access the Internet.
Data can be exchanged at speeds of up to 85 Mbps*2
on your network.
*1: PLC does not
have
router function. To connect
to the Internet
via
network, Broadband Internet
connection and related devices such as router etc
is required.
*2: The actual communication speed may be affected
by power line conditions, other electrical appliances
and network conditions.