• @>
INPUT
FLASHBACK
00
On-Screen Display Menu
Digital Setup Menu
This setting allows you
to
optimize the settings of
Digital broadcasting.
Example
Digital Setup
1 Press
MENU
to display the MENU screen, and then
press
....
/~
to select "Digital Setup".
2 Press Ji./T
to
select a specific adjustment item,
and then press
ENTER.
3 Press Ji./T (or
....
/~)
to select the desired setting,
and then press
ENTER.
4 Press
MENU
to exit.
Audio Setup
You can output digital audio to
an
AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is
connected to the DIGITAL AUDIO OUTPUT terminal
on the
TV.
Please select
an
audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in
PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal
in
Dolby Digital form. It reproduces sound from
surround program of digital.
Identification
The current version
of
the TV software
is
displayed.
Software Update
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the
TV.
Regarding how
to
obtain the software update
file,
please call1-800-BE-SHARP.
•••
• •
•
o
LQj
BmmD
• Do not remove the USB memory device or unplug the
AC cord while the software
is
being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data
in
the USB
memory device and software updating will fail.
1 Insert the USB memory device with the update file
into the SERVICE terminal on the
TV.
2 Press
MENU
to display the MENU screen, and
then press
....
/~
to select "Digital Setup".
3 Press Ji./T
to
select "Software Update", and then
press
ENTER.
•
If
you have already set the Secret No., go to step
4.
• Digital Setup
4 Input the 4-digit secret number by using 0-9.
I • Digital Setup I
_111---
@-
31
To Next Page
Loading...
