On-Screen Display Menu
On-Screen Display
Menu
Operation
Example Example
@
"="111="
.,
Picture
7/
Option
'-----------@
The bar above
is
an
operational guide for
the remote control. The bar will change
in
accordance with each menu setting screen.
G)
Press
~/~
to
select the desired item.
® Press
..
IT
to
select the desired item.
@ Press
~/~
to
adjust the item.
G)
Item displayed
in
yellow
• This indicates the item currently selected.
• Press
ENTER to go
to
the adjustment screen for this
item.
® Item
in
brackets
• This indicates the current setting for the item.
@ Item displayed
in
white
• This indicates that the item can be selected.
@ Item displayed
in
gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
-Nothing
is
connected
to
the selected input terminal.
- The function
is
not compatible with the current input
signal.
mm
• Menu options differ
in
the selected input modes, but the
operating procedures are the same.
• The screens
in
the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu
Operation Buttons
Using
the
remote control
Use the following buttons on the remote control to
operate the menu.
Using the control panel
of
the
main unit
You can also operate the menu with the control panel
of
the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
POOW'R
MENU: MENU
on
the remote
control.
CHI\IV:
Cursor
J!II.1'f
on the
remote control.
VOL
+
1-:
Cursor
....
/~
on the
remote control.
INPUT: ENTER on the remote
control.
CH
r
VOL
I:
INPUT
•
MENU
•
Press
to
open or close the menu screen.
Press
to
select a desired item on the screen or
adjust a selected item.
Press
to
go to the next step or complete the
setting.
Press
to
return
to
the previous step.
RETURN:
ENTER:
MENU:
J!IIf'f/
....
/~:
@-
21
To Next Page
Loading...
