Sharp Aquos LC 46SE94U

Appendix
Removing the Stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
B!iiD
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• LC-46SE94U/LC-52SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the 1V.
• Before performing work spread cushioning over the base area to lay the
1V on. This will prevent it from being
damaged.
1
Hex key
2
3
Unfasten the four screws used to
secure the stand
in place.
Detach the stand from the 1V.
(Hold the stand so
it will not drop
from the edge of the base area.)
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the 1V, and press
until they lock into place.)
ImID
• To attach the stand, perform the above steps in reverse order.
• LC-65SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the 1V.
1 2
Unfasten the four screws used to
secure the stand
in place. Detach the stand from the 1V.
ImID
• To attach the stand, perform the above steps in reverse order.
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the 1V, and press
until they lock into place.)
@-45