Sharp Aquos R3

105
Apps
4
Set each item
1 Repeat
z
Set the repetition of the alarm.
2 Alarm sound
z
Set the alarm sound.
3 Label
z
Enter the label.
4 Delete
z
Delete the alarm.
5 Alarm ON/OFF
z
Enable/Disable the alarm.
6 Vibration
z
Set whether to use the vibrator.
7 Switch displays
z
An alarm is not activated when the handset is turned off at the
set alarm time.
z
When the set alarm time arrives during a call, the other party's
voice and notification sound are heard at the same time.

Stopping an alarm
Activate an alarm tone or vibrator at the set alarm time.
1
Slide [ ] to [ ] while an alarm is ringing
z
To use a snooze: slide [ ] to [ ]
Stopping an alarm while display is turned on
When the set alarm time arrives while a screen other than lock
screen of the touch panel is displayed, the alarm notification is
displayed. Stop the alarm by using the notification.
1
[DISMISS] while an alarm is ringing
z
To use a snooze: [SNOOZE]

Adjusting an alarm volume
1
In the alarm screen, [ ]▶[Settings]
2
Adjust the volume in Alarm volume field