Sharp Aquos R3

68
Call
Answering a call
z
This function can be used when you are using a callable
nanoSIM Card.
1
When a call is received, the ringtone sounds
2
Answer the call
1 Accept
z
Swipe up to answer the incoming call.
z
Swipe down to reject the incoming call.
2 Quick reply
z
Reject the incoming call and send a selected SMS
message to the other party.
3
[ ] to end the call

Answering a call while display is turned on
When a call is received while a screen other than lock screen of the
touch panel is displayed, the incoming notification is displayed. You
can answer the call by using the notification.
1
When a call is received, the incoming
notification is displayed at the top of the screen
2
[ANSWER]
z
Touch the incoming notification to display the incoming call
screen. Operate each icon.
z
To reject an incoming call, touch [DECLINE].
Operation during a call
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the usage
condition during a call.
1 Other party's name and phone number
2 Keypad
z
You can enter touch-tone signals.
3 Mute
z
Enable or disable the mute setting on a current call.
4 Add call
z
Place a current call on hold and make a call to another party.
5 End call
z
End a call.
6 Speaker/Sound
z
You can talk with hands-free.
z
Set the audio output destination when the headset or
Bluetooth device is connected.