Sharp Aquos R3

69
Call
7 Hold
z
Hold a call. To unhold a call, touch again.
8 Menu
z
Displays available functions (menus).
z
Note the followings to use hands-free call.
y
Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
y
When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use the headset.
y
If the sound breaks up during a hands-free call, lower the
in-call volume.
z
To use [Hold] and [Add call], you must contract with your
network operator. For details, contact your network operator.
Note that some network operators may not provide those
functions.

Adjusting the in-call volume
1
1/2 during a call

Using Clear talk
When [Clear talk] is enabled, you can measure ambient noises
using the microphone and communicate by making your voices
sound clear during a call.
1
[Menu]▶[Clear talk] during the call
z
Clear talk processes voices to make conversations sound
clear. Sound quality may vary depending on the surrounding
noises and the tone of the voice.
z
When using Clear talk, make sure not to cover the hole of
the microphone and move the mouthpiece as close to your
mouth as possible for speaking.
z
Clear talk is not available in the case that the other party's
voice is not emitted from the earpiece, such as during a
hands-free call.

Using Slow talk
When [Slow talk] is enabled, the speed of the other party's voice is
slowed down during a call and you can hear the voice well.
1
[Menu]▶[Slow talk] during the call