Sharp Aquos R3

32
Before Using the Handset
Before Using the Handset
Part names and functions
1 nanoSIM/microSD Tray
z
It is possible to insert two nanoSIM Cards or one nanoSIM
Card and one microSD Card in the nanoSIM/microSD Tray.
z
For details on nanoSIM Card
☞
P. 36 “nanoSIM Card”
z
For details on microSD Card
☞
P. 38 “microSD Card”
2 Front Camera
z
For details on using camera
☞
P. 86 “Camera”
3 Earpiece or Earpiece/Speaker
4 Proximity sensor/Brightness sensor
*1
z
Detects the approaching of your face to prevent inadvertent
operation during a call and used for automatically controlling
the brightness of the screen.
5 Incoming/Charging Lamp
z
For details on incoming/charging lamp
☞
P. 53 “Incoming/
Charging Lamp”
6 1/2: Volume Up/Down key
z
Use to adjust each volume, shoot with the camera, set
manner mode, etc.
7 3: Power Key
z
Used to turn the power on/off and turn the screen on/off.
Pressing it for at least 2 seconds displays a menu to allow you
to operate [Power off], [Restart], and [Screenshot].
z
For details, see the following sections.
y
For details on turning the power on/off
☞
P. 43 “Turning
power on/off”
y
For details on shooting a screenshot
☞
P. 47 “Shooting
screenshot”