144
Data Communication
Using Bluetooth function
z
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before you start registration, decide on
a one- to sixteen-digit number. Enter the same number on the
handset and the other party's Bluetooth device.
z
Set the other party's Bluetooth device to the registration
stand-by status in advance.
1
In the home screen, display “app list screen”▶
[Settings]▶[Connected devices]▶[Connection
preferences]▶[Bluetooth]
2
Set to On
3
[Pair new device]
4
Select a Bluetooth device▶[PAIR]
z
The confirmation screen for connection may be displayed.
z
Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start establishing a connection after
registration is completed.
z
Touch [
] of a paired Bluetooth device to set name and
intended purpose of the other party's Bluetooth device.
z
You can connect up to seven Bluetooth devices at the same
time. Bluetooth devices may not work properly or the number of
Bluetooth devices that can be connected at the same time may
differ depending on the profile.
z
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
z
When [Bluetooth] is set to On, the handset is set to receive
registration requests/connection requests from other Bluetooth
devices. Display the Bluetooth screen when searching for the
handset from other Bluetooth devices.
z
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status, etc.
z
For details on the operations of the other party's Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
