17
Part Material
Surface
treatment
IMEI plate PET resin PET resin
laminate
Charger (A type/C type)
Part Material
Surface
treatment
Power plug Brass Nickel plating
Exterior PC resin None
USB connector pin (Metal
section)
SPCC Nickel plating
USB connector pin (Resin
section)
LCP resin None
USB cable
Part Material
Surface
treatment
USB plug (Exterior section) TPE resin None
USB plug (Metal section) SPCC Nickel plating
USB plug (Resin section) PBT resin None
Cord TPE resin None
Type-C plug (Exterior
section)
TPE resin None
Type-C plug (Metal section) Stainless steel Nickel plating
Type-C plug (Resin section) LCP resin None
Headset
Part Material
Surface
treatment
Earphone (Exterior section) ABS resin None
Earphone (Side surface) TPE resin NCVM
Earpiece Silica gel None
Microphone section ABS resin None
Cord TPE resin None
Plug (Exterior section) TPE resin None
Plug (Metal section) Brass Gold plating
Plug (Resin section) POM resin None
SIM Eject Pin
Part Material
Surface
treatment
Body Stainless None
Handling the SIM Eject Pin
Warning
The tip of the SIM Eject Pin is sharp. Do not use it
pointing at yourself or others.
May cause bodily injury, loss of eyesight, etc.