34
*
1
Feed paper lengthwise only.
*
2
Leading and trailing edges.
*
3
Along the other edges in totals.
*
4
Not includes toner and drum cartridges.
ABOUT SUPPLIES
When ordering supplies, please use the correct part numbers as listed below.
Supply list
*Based on copying onto A4-type paper at 6% toned area.
Unit dimensions
Width 518mm
Depth 462.5mm
Height 295.6mm
Operating conditions
Temperature: 10°C to 30°C
Humidity: 20% to 85%
Noise level
Sound Power Level L
wA (1B=10dB)
Copying: 6.4 [B]
Standby: 3.3 [B]
Sound Pressure Level L
pA (bystander positions)
Copying: 48 [dB (A)]
Standby: 17 [dB (A)]
Sound Pressure Level L
pA (operator position)
Copying: 52 [dB (A)]
Standby: 17 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
OptEmission concentration
(measurement according to
RAL-UZ 62)
Ozone: less than 0.02 mg/m
3
Dust: less than 0.075 mg/m
3
Styrene: less than 0.07 mg/m
3
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.
Be sure to use only genuine SHARP parts and supplies.
For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximize the
life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.
Supply Part number Usable life
Toner cartridge AR-208T Approx. 8,000 sheets*
Model AR-5420
To Next Page
Loading...
