AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 18
* When maintenance message is displayed, replace consumption part
reaching the number of sheets of maintenance, then clear the
replaced part's counter only.
Operation/procedure
Each counter is displayed.
The counter display is in 7 digits.
Operation/procedure
Each counter data are displayed.
The counter display is in 7 digits.
Operation/procedure
The misfeed history is displayed in the sequence of recentness by the
name of sensors and detectors. Max. 40 items of information can be
stored in memory. (The old ones are deleted sequentially.) The trouble
section may be determined by the data.
(Jam cause code)
22
22-1
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the counter value of each section.
Item Counter
TOTAL Total counter
MAINTENANCE Maintenance counter
DEVE Developer counter
DRUM Drum counter
COPY Copy counter
PRINTER Printer counter
IMC IMC counter
DUPLEX Duplex counter
OTHERS The other counters
FAX SEND FAX Send counter
FAX RCV FAX receive counter
FAX OUTPUT FAX print counter
22-2
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the total numbers of misfeed and
troubles. (When the number of misfeed is considerably
great, it is judged as necessary for repair. The misfeed
rate is obtained by dividing this count value with the
total counter value.)
Item Trouble
PAPER JAM JAM counter
SPF JAM RSPF JAM counter
TROUBLE Trouble counter
22-3
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the misfeed positions and the number of
misfeed at each position. (When the number of
misfeed is considerably great, it can be judged as
necessary for repair.)
Item Trouble Mis-feed
Item Jam contents
TRAY1 1st cassette pick-up miss
TRAY2 2nd cassette pick-up miss
TRAY3 3rd cassette pick-up miss
TRAY4 4th cassette pick-up miss
BPT Multi manual feed pick-up miss
PPD1_ND Paper-in sensor lead edge jam
PPD1_ST Paper-in sensor rear edge jam
PPD1_DUP Paper-in sensor reverse jam
PPD2_ND Duplex sensor lead edge jam
PPD2_ST Duplex sensor rear edge jam
POD2_ND Upper stage paper exit lead edge jam
POD2_ST Upper stage paper exit rear edge jam
POD1_ND Lower stage paper exit lead edge jam
POD1_ST Lower stage paper exit rear edge jam
PINT_SHORT Abnormality between PS papers.
PFD2_ND 2nd paper pass lead edge jam
PFD2_ST 2nd paper pass rear edge jam
PFD3_ND 3rd paper pass lead edge jam
PFD3_ST 3rd paper pass rear edge jam
PFD4_ND 4th paper pass lead edge jam
PFD4_ST 4th paper pass rear edge jam
SIZE_SHORT Duplex short scale error
FIN_INPDND Finisher paper entry jam
FIN_T1OD Finisher escape tray jam
FIN_T2OD Finisher offset tray jam
FIN_STPL Finisher staple tray jam
PPD1_ND2 Reverse sensor lead edge jam
PPD1_ST2 Reverse sensor rear edge jam
FES_N Finisher entry port sensor not-reached jam
FES_S Finisher entry port sensor remaining jam
FJES_N Interface transport inlet port not-reached JAM
FJES_S Interface transport inlet port remaining JAM
FJOS_N Interface transport exit port not-reached JAM
FJOS_S Interface transport exit port remaining JAM
FPUSH Bundle roller pinching JAM
FSTPL Staple jam
FPNCH Punch jam
FFPS_N Saddle not-reached jam
FFPS_S Saddle remaining jam
FDOP Door open jam
To Next Page
Loading...
