AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 23
Operation/procedure
1. Press the [START] key.
The confirmation menu is shown.
2. Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1. Press the [START] key.
The confirmation menu is shown.
2. Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1. Select the counter to be cleared with the 10-key.
2. Press the [START] key.
The confirmation menu is shown.
3. Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1. Select the “3: NUMBER OF PRINTS”, and press the [START] key.
The confirmation menu is shown.
2. Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Note: Executable only when the FAX is installed.
Operation/procedure
1. Press the [START] key.
The confirmation menu is shown.
2. Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
The scanner mode counter and the number of send of the scanner are
cleared.
* The simulation to perform communication with the PCL is inhibited
until Notice Page storing is completed. (Only when the serviceman
call error occurs.)
* When in other than the serviceman call error, entering the simulation
is not allowed from the system check display.
24-6
Purpose Data clear
Function (Purpose) Used to clear the copy counter.
Item Counter Copier
24-7
Purpose Data clear
Function
(Purpose)
Used to clear the OPC drum (membrane decrease)
correction counter. (This simulation is executed when
the OPC drum is replaced.)
Section
Image process
(Photoconductor/Developing/Transfer/Cleaning)
Photo conductor
Item Counter
24-9
Purpose Data clear
Function
(Purpose)
Used to clear the printer counter and other counters.
Section Printer
Item Counter Printer
Item Content
1 PRINTER
Printer counter
2IMC
IMC counter
3DUPLEX
DUPLEX counter
4OTHERS
The other counters
24-10
Purpose Data clear
Function (Purpose) FAX counter data clear
Section FAX
Item Counter
Item Content
1
FAX SEND
(PAGE & TIME)
FAX send page and time
2
FAX RECEIVE
(PAGE & TIME)
FAX receive page and time
3 FAX OUTPUT FAX output (number of prints)
24-15
Purpose Data clear
Function
(Purpose)
Used to clear the scanner counter in the network
scanner mode.
Section Scanner section
Item Counter
To Next Page
Loading...
