AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 39
Operation/procedure
1. Select “1: COPY START.”
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note:Executable only when the FAX is installed.
Operation/procedure
1. Select “1: COPY START.”
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the current set value are highlighted.
2. Press the [START] key.
The display is shifted to the copy menu.
3. Select the paper feed tray and the print density.
Set the exposure level with the 10-key.
4. Press the [START] key.
Copying is started.
(Auto adjustment)
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
46-15
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment
(Super Fine mode individual adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start – –
2 EXP.LEVEL Exposure level selection
0-99 50
3 AE (PHOTO ON)
Super Fine AE
(Half tone)
4 AE (PHOTO OFF) Super Fine AE
5
MANUAL
(PHOTO ON)
Super Fine MANUAL
(Half tone)
6
MANUAL
(PHOTO OFF)
Super Fine MANUAL
46-16
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment
(Ultra Fine mode individual adjustment)
Section FAX
Item Image quality
1
3
50
50
50
50
1
Normal display NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start – –
2 EXP.LEVEL Exposure level selection
0-99 50
3 AE (PHOTO ON) Ultra Fine AE (Half tone)
4 AE (PHOTO OFF) Ultra Fine AE
5
MANUAL
(PHOTO ON)
Ultra Fine MANUAL
(Half tone)
6
MANUAL
(PHOTO OFF)
Ultra Fine MANUAL
46-18
Purpose Adjustment
Function
(Purpose)
Used to adjust inclination for each exposure mode.
Item Picture quality
Item Content
Setting
range
Default
1
AE
AE
1-99 50
2
TEXT
Character Level 3.0
3
TEXT/PHOTO
Character/Photo Level 3.0
4
PHOTO
Photo Level 3.0
5
AE(TS)
AE(TS)
6
TEXT(TS)
Character (TS) Level 3.0
7
TEXT/PHOTO(TS)
Character/Photo
(TS)
Level 3.0
50
50
50
50
1
SIMULATION 46-18
To Next Page
Loading...
