Eestlane
Español
Deutsch
Dansk
Srpski
English
Please select your language.
Press OK to continue.
Welcome
Please select your country.
Press OK to continue.
Country
France
United Kingdom
Finland
Spain
Denmark
Germany
Confirm PIN
New PIN
Please set a PIN. “0000” is not a valid
PIN.
Press OK to continue.
PIN
Please select your time zone.
Press OK to continue.
Time Zone
Peninsula and Balearic Islands Time
Canary Islands Time
18
Full First Time Installation
When the set is turned on for the fi rst time it will enter the installation mode as shown here. It is recommended
that all steps are completed as shown in the process to ensure correct operation. Use the back button on your
remote control to return to the previous screen.
1. When the set fi rst turns on, you will be
requested to select your preferred on-
screen display language. This will set the
language in which the menus and associated
information is displayed in. Should you wish
to do so, this can be changed later in the
Device Preferences menu.
2. Select the correct country in which the set
will be used in. This will enable the set to
correctly install the functions applicable in
the country of use.
3. A PIN needs to be set to establish parentol
controls.
4. Set the Time Zone in which the TV will reside.
This may be dependent on the country you
selected in step 2.
Getting Started
Note: When setting the PIN, you can only set four
numbers. Please make a note of this as you will need
it to access Parental Settings.
To Next Page
Loading...
Need help?
General