When this television is connected to the internet, it will collect limited, non-
personally identifiable information which will be sent to MediaTek inc.
(”MediaTek”) and its service providers. Certain parts of this information may be
aggregated and shared with third party partners for business and product
analysis purposes only. By clicking “Accept” you acknowledge and agree to the
collection and sharing of this information as dscribed in more detail in the “View
Additional Details” section, as well as the automatic download of essential
firmware/software updates. Please note that if this Notice is translated in a language
other than English, the English version shall always prevail as the sole
basis for the interpretation of the terms described herein.
DATA COLLECTION AND FIRMWARE UPDATES
NOTICE
VIEW ADDITIONAL DETAILS
ACCEPT
Skip
Start Netflix
Unlimited TV shows and movies.
No commercials, no commitments.
Press OK to continue.
Set up Netflix
Store Mode
Home
Select TV mode.
Press OK to continue.
TV Mode
Skip
Wired Network
Wifi Network
Please select network type.
Press OK to continue.
Network
Skip
DTV Scan
Please select scan mode
Press OK to continue.
Channel Scan
19
5. You will need to agree to certain
information collection for the TV set to
operate as intended.
6. You can connect the TV to your broadband
router or wireless network in order to
take advantage of the Smart functions. If
you connect the TV to your router using
an Ethernet cable, the Wifi set up will be
skipped.
7. If you have a Netfl ix account, it can be set
up on the television here. Once set up and
validated, the First Time Installation returns
to the next step.
8. For normal use, by default it is set to a
power saving mode which reduces the
energy used by up to 25% (by reducing the
power to the LED/LCD panel). This can be
changed in the picture mode settings.
9. Choose to install channels via Antenna,
Cable or Satellite. Then Select the next
option to scan in channels.
Getting Started
Note: In home mode, the TV will switch off
automatically after 4 hours in the event that no
buttons are pressed on the TV or remote control.
Note: Analogue signals in the United Kingdom have
been turned off . Only Digital signals are available.
To Next Page
Loading...
Need help?
General