91
GRAPHING FUNCTIONS
(12) Split screen
• The split screen displays both a graph and a table at the same time.
In the table set display (see above), press Ï
.
• The screen changes to the display shown on the right.
The cursor pointer is located on the graph, and the
coordinates of the cursor pointer location are high-
lighted in the table.
• The table screen shows X and Y1. They indicate the
number of the equation on which the cursor pointer is located.
• When the cursor pointer is moved to the graph Y2 using ≤ or ≥, the Y1
display changes to the Y2 display, and the table shows the Y2 value for X.
In the split screen, the TRACE mode is active.
• To exit from the split screen, press Ï œ.
EL-9650-(04)En (079-134) 8/7/00, 9:07 PM91
To Next Page
Loading...
