Sharp EL-9650 - Using the Touch-Pen on the Normal Function Calculation Screen

40
CHAPTER 2
(2) Using the touch-pen on the normal function calculation
screen
<Example>
The touch-pen operation for changing the “3” of entered “56 × 32” to “4” is explained
here.
1. Initialize the screen.
Press
¬ .
2. Input 5 , 6 , j , 3 , 2 using manual key entry.
3. Touch “3” on the screen using the pen.
The cursor will flash on top of the “3” indicating the
edit mode (it is now possible to correct the “3”) as
shown to the right.
4. Press d4 .
5. “56×42” will be calculated when pressing ® .
<Example>
The touch-pen operation for changing “56×42”, which
has completed calculation of “56×42 = 2352”, to “36×42”
is explained here.
1. Touch the area above the answer (2352 on the
diagram to the right) with the touch-pen.