243
PROGRAMMING FUNCTION
3. First, the value of the variable M is opened.
4. Press 5
®
next to open the value of B.
5. Press 7
®
to perform the calculation using the
value of X stored to the X memory space and
determine the value of Y.
5. Programming Commands
• The following explains the commands used for
programming.
• The programming commands are displayed by
pressing
Ï
in the program mode.
• The programming commands are shown in 8 main menus and their sub-menus.
• All of the programming commands can be used in the program mode.
* The input of ordinary functions by keying in or from the MATH menu, etc., is not explained here
but almost all of these functions can be used in programs.
(1) A PRGM menu
Press
Ï
A
to select [A PRGM] and display the menu as described above.
[1 Print]
1. The value of the variable is displayed on the screen.
The display format is determined by the SET UP menu settings.
Entry: Print variable
<Example>
Print A
* “A” indicates the memory space
Print mat C
Print L1
EL-9650-(12)En (239-258) 8/1/00, 9:31 AM243
To Next Page
Loading...
