5.2 Replacing the top cabinet
Replace the top cabinet in the reverse order of removing,
When replacing the cabinet,
use care to prevent the heat sink
from catching the cables that connect the display PWB and main
Pm.
Also, prior to fixing the top cabinet make sure the interface
cable between the display PWB and the main PWB is securely
connected to the socket on the main PWB.
5.3 Removing the main drawer
1. Remove the two screws from the bottom of the drawer.
(Fig. 2)
Fig. 2
2.
Move the main unit forward (in the direction of the arrow a) and
lift upwards (the arrow b).
(Fig. 3)
3.
Disconnect the drawer connectioncable and grounding strap.
–11–
To Next Page
Loading...
