I
119
I
Sample“Checkover”print
If any print other than shown above occurs, it indicates that the
ER-31RS2 is malfunctioning.
6.4 Programming
1. Modification of the SRV-modeprogram
0 Reprogrammingto enable or disable the ER-31Rs2 option to select
the kitchn printer or the RS-232C communicationfunction.
909 ~ —~
.—.l~.—>
‘3
IT
A~B+c+D~
\
/
Data entry with
numeric keys
In the above key operation,
A, B, C, and D each refer to preset
data of job number 909; and for convenience,data in the fourth
column is called A, the one in the third column B,
the one in the
second column C, and the one in the first column D.
Of these data, data D decides whether to enable or disable the
ER-31RS2 option and to select the kitchen printer or the RS-232C
communicationfunction.
Change the data according to Table 4.
Table 4
Kitchen printer/
RS-232C communi-
ER-31RS2
Data
option
cation function
Disable
o
RS-232C communi-
Enable
1
cation function
Disable
2
Kitchen printer
Enable
3
Note:
For data D, never enter any digit other than those shown
in the above table.
–21–
To Next Page
Loading...
