Sharp er-3100 - Page 44

Note: For data C and D never enter any digits other than those
shown in Tables 15 and 16.
Data A and B do not need to be changed.
Enter the same
data as data A and B of job number 901 shown in the
SRV-modeprogram list priiltedby job number 900 before
installingthe option.
When you need to change data A to O, any leading zeros
need not be entered.
Example 1:
If data A, B, C, and D are O, 4, 1, and 2,
enter like this:
E+ B + E=
Example 2:
If data A, B, C and D are O, 0, 1, and 2,
enter like this:
E“D
.
2.
PGM-mode PLU programming
This programmingis described in the InstructionManual.
If yOU
are asked to perform this programming,however, perform it
accordingto customer’srequirements.
The PLU programmingconsists of the followingthree jobs:
(1) Programmingof unit prices -- job number 20
X=o
xxxxxx~”
m—
For automatic
incrementof
PLU code
Zzz:
PLU code
Xxxxxx:
Unit price;
enter a maximum of six digits.
(The
denominationsused for unit price entry is in
cents.)
If the unit price is $6.00, for example,
enter “600”.
(2) Programmingof departmentsto be associatedwith PLUS -- job
number 22
i.
–40–