[JOB#2010]
UPC FUNCTION PROGRAMMING
XXXXXXXXXXXXX: UPC code
A: Price shift entry A
Allowed 0
Inhibited 1
Compulsory 2
B: Tare table No. B
Non 0
Table No. 1 to 9
C: Scale entry C
Inhibit 0
Enable 1
Compulsory 2
D: Record delete method D
Delete at X/Z non-accessed
UPC deleting job
0
Non delete 1
Delete now 4
MRS = Nothing (Default = 0000)
The default is a value is set when a new UPC record is created by
another programming JOB.
If the record of the entered UPC code is not in the UPC file at this
programming step, the UPC code will be created.
[JOB#2011]
UPC TAX STATUS PROGRAMMING
XXXXXXXXXXXXX: UPC code
A: Sign A
+0
-1
B: Food stamp B
No 0
Yes 1
C: Taxable 4 C
No 0
Yes 1
D: Taxable 3 D
No 0
Yes 1
E: Taxable 2 E
No 0
Yes 1
F: Taxable 1 F
No 0
Yes 1
MRS = 0000000
If the record of the entered UPC code is not in the UPC file at this
programming step, the UPC code will be created.
[JOB#2014]
UPC TEXT PROGRAMMING
XXXXXXXXXXXXX: UPC code
Characters can be entered by using the character keys (direct
key) or the numeric keys (code entry).
Please refer to section 4.
MRS = 0000000
If the record of the entered UPC code is not in the UPC file at this
programming step, the UPC code will be created.
Note: The ER-A450T does not have "Readout of the programmed
text" because the text modification function is not supported.
[JOB#2017]
UPC MIX & MATCH TABLE No. PROGRAMMING
XXXXXXXXXXXXX : UPC code
ZZ : Mix&Match table No. = 00 to 99
MRS = 00
If the record of the entered UPC code is not in the UPC file at this
programming step, the UPC code will be created.
2010 ABCDXXXXXXXXXXXXX
No change
UPC code
(Scanning)
CA/ATSBTL
@/FOR
@/FOR
2011 ABCDEFXXXXXXXXXXXXX
No change
UPC code
(Scanning)
CA/ATSBTL
@/FOR
@/FOR
Character
key
All space
2014 XXXXXXXXXXXXX
UPC code
(Scanning)
CA/ATSBTL
@/FOR
@/FOR
2017 ZZXXXXXXXXXXXXX
No change
UPC code
(Scanning)
CA/ATSBTL
@/FOR
@/FOR
To Next Page
Loading...
